Ringhiere Steel 10 per balconi e soppalchi

More Views

  • Steel 10 railings for balconies and mezzanines
  • Steel 10 railings for balconies and mezzanines
  • Steel 10 railings for balconies and mezzanines
  • Steel 10 railings for balconies and mezzanines
  • Steel 10 railings for balconies and mezzanines
  • Steel 10 railings for balconies and mezzanines
  • Steel 10 railings for balconies and mezzanines
  • Steel 10 railings for balconies and mezzanines

Steel 10 for balconies and mezzanines

As low as:
£99.00
Free Shipping
X
The shipment of our products is FREE to the mainland UK.

We cannot deliver to Islands (Isle of Man, Isle of Wight, Jersey etc.) but we will deliver to the nearest port within mainland UK.
X

Details:


Ideal for balconies and mezzanines, Steel 10 is the Fontanot steel railing that can be mounted as balustrade on any flat surface, both indoors and outdoors.
The materials of all the components and their finishes can withstand salt spray, pollution and sun rays, and child safety is guaranteed by the small interspaces and the vertical configuration.
The modular kit HF0210 contains everything you need to build a balustrade of 150cm in length and 110cm in height, in white-painted (RAL 9010) Fe360 steel.
The joints allow installation at variable angles (from 90° to 270°) and personalizing the structural parts during installation by modifying both the height and the length of the balustrade.
£99.00

Details

With Steel 10, the modules contained in the HF0210 kit allow easy and fast installation of a balustrade on flat surfaces by building sections made up of 4 load-bearing structural parts (2 vertical and 2 horizontal) interspersed with 11 vertical square cross-section tubes.
The joints, complete with white rivets for removal-proof fixing, allow installation angles from 90° to 270° as well as cutting the structural parts and joining the modules during installation, modifying both the height and the length of the balustrade.
Ideal for balconies and mezzanines, because installable both indoors and outdoors.
Use Balustrade railing module for indoor and outdoor flat surfaces.
Material Fe360 steel
Finishing White-painted (RAL 9010).
Dimensions Each HF0210 kit contains everything you need for a balustrade of 150cm in length and 110cm in height. Rectangular cross-section baluster (cut between 5 and 110cm): 40x20x2 mm. Sections (cut between 16 and 150cm): 40x20x2 mm. Tubes: 12x12x1 mm.
Structure Each kit allows building a section made up of 4 load-bearing structural parts (2 vertical and 2 horizontal) interspersed with 11 vertical square cross-section tubes. PA6 technopolymer fixings and joints are included, adjustable with straight sections or v
Warning The kits do not contain the screws and plugs for floor and wall fixing.

CATALOGO



STEEL 10 ISTRUZIONI DI MONTAGGIO BALAUSTRA


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Do I need to comply with building regulations?

All spiral staircases whether new or replacement need to comply with the UK building regulations - there are also special requirements for Spiral Stairs and Space Saver stairs which are detailed in BS5395-2, the British Standard which applies to staircases of this type, BS5395-2 is referred to in building regulations as the general standard for spiral staircases and helical stairs. For expert and impartial advice email us at technical@spiralstairs-direct.co.uk, or give us a call on 0121 351 1533 and discuss your requirements with one of our experienced UK technical team members.


Spiral Staircase Dimensions under Building Regs BS5395-2


One aspect of UK building regulations is that it refers to British Standard BS5395-2 for most aspects of spiral staircase dimensions. 

Generally the two key tread dimensions are: 
Clear tread width - measured between the INSIDE of the handrail and the centre column - this should be a MINIMUM of 600mm
Tread riser height - this should be a MAXIMUM of 220mm to meet UK building regulations. Generally if you divide the total finished floor to finished floor height of your room (NOT floor to ceiling!) by 220mm this will give you the minimum number of risers in your staircase to meet building regs. If the result is not a whole number then you need to adjust to the next whole number above - e.g. if the result is 13.5 risers, you actually need 14 risers.
Please note most spiral staircases with height adjustment will have a quoted range of adjustment up to 230mm per riser - if you need to use a riser height above 220mm for any reason then we suggest you first contact your building control department for clearance.


More Info

Reviews

Write Your Own Review

You're reviewing: Steel 10 for balconies and mezzanines

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Customer care
Price