Supplementary balustrade Fontanot Tulip: 120 cm modules.
The supplementary balustrade for Fontanot Tulip staircase range is composed of 10 varnished white steel balusters and a PVC wood effect to aluminium-core handrail . This staircase balustrade is designed to protect the opening on the landing.
Like the Fontanot Tulip staircase range, this balustrade is easy to assemble and to install onto your stairs.
The fixings are supplied.
La balaustra della scala consente di proteggere l'apertura del piano superiore.
E' composta da moduli componibili da 120 cm, contenenti 10 colonnine in acciaio verniciato bianco e corrimano in PVC effetto legno con anima in alluminio.
Do I need to comply with building regulations?
All spiral staircases whether new or replacement need to comply with the UK building regulations - there are also special requirements for Spiral Stairs and Space Saver stairs which are detailed in BS5395-2, the British Standard which applies to staircases of this type, BS5395-2 is referred to in building regulations as the general standard for spiral staircases and helical stairs.
Spiral Staircase Dimensions under Building Regs BS5395-2
One aspect of UK building regulations is that it refers to British Standard BS5395-2 for most aspects of spiral staircase dimensions.
Generally the two key tread dimensions are:
Clear tread width - measured between the INSIDE of the handrail and the centre column - this should be a MINIMUM of 600mm
Tread riser height - this should be a MAXIMUM of 220mm to meet UK building regulations. Generally if you divide the total finished floor to finished floor height of your room (NOT floor to ceiling!) by 220mm this will give you the minimum number of risers in your staircase to meet building regs. If the result is not a whole number then you need to adjust to the next whole number above - e.g. if the result is 13.5 risers, you actually need 14 risers.
Please note most spiral staircases with height adjustment will have a quoted range of adjustment up to 230mm per riser - if you need to use a riser height above 220mm for any reason then we suggest you first contact your building control department for clearance.