Italia
Additional railing Fontanot Tulip stairs

More Views

  • Additional railing Fontanot Tulip stairs
Fontanothttps://uk.fontanotshop.com/media/catalog/product/6/0/600x800-ring-supp-tulip_2.jpgkit-ringhiera-supplementare-fontanot-tulip

Additional railing Fontanot Tulip stairs

X
Details:
The additional railing allows to increase the number of the balusters to the railing already supplied into the kit.
It is composed by 15 balusters that allow to have a better safety children in reducing the space between each balusters.

The railing baluster are in steel painted to choose from: Glossy White Ral 9010, Glossy Black Ral 9017, Grey Ral 9006 and Iron grey.

The kit is available ONLY for 168 cm and 178 cm diameters.

PRODUCT TEMPORARILY UNAVAILABLE


More Info

Details

The additional railing allows to increase the number of the balusters to the railing already supplied into the kit.
It is composed by 15 balusters that allow to have a better safety children in reducing the space between each balusters.

The railing baluster are in steel painted to choose from: Glossy White Ral 9010, Glossy Black Ral 9017, Grey Ral 9006 and Iron grey.

The kit is available ONLY for 168 cm and 178 cm diameters.

  • Balusters distance:
    In this image a detail of the distance between baluster with and without additional railing:

  • Railing:
    The railing is with vertical baluster painted steel: Glossy White Ral 9010, Glossy Black Ral 9017, Grey Ral 9006 and Iron grey.

    Particular railing Tulip
    Particular railing Tulip
  • Steel Finishing:
    The staircase comes in 4 finish colours:

    Glossy White Ral 9010
    Grey Ral 9006
    Iron grey
    Glossy Black Ral 9017
  • Cleaning and maintenance:
    Clean the treads as soon as dirt spots and dust deposits appear and at least every 6 months using a soft cloth moistened with water and specific non-abrasive and non-aggressive detergents. NEVER use abrasive scourers. After cleaning, thoroughly dry the surfaces with a microfibre cloth to remove the haloes that form because of the limestone in the water. Approximately 12 months from the date of installation, check tightness of the screws of the various components. Should even the smallest malfunction occur, it is obligatory to immediately and professionally carry out extraordinary maintenance.
  • Use precaution:
    Avoid any improper use that is not in accordance with the product. possible violations or installations which don’t comply with the providers instructions can invalidate the agreed product conformities.
Use Internal
Measures No
Finishing Steel painted
Material Steel
Metal Color Glossy White Ral 9010, Glossy Black Ral 9017, Grey Ral 9006 and Iron grey
Baluster Varnished steel balusters
Handrail In PVC wood effect with an aluminium core

Do I need to comply with building regulations?

All spiral staircases whether new or replacement need to comply with the UK building regulations - there are also special requirements for Spiral Stairs and Space Saver stairs which are detailed in BS5395-2, the British Standard which applies to staircases of this type, BS5395-2 is referred to in building regulations as the general standard for spiral staircases and helical stairs. 


Spiral Staircase Dimensions under Building Regs BS5395-2


One aspect of UK building regulations is that it refers to British Standard BS5395-2 for most aspects of spiral staircase dimensions. 

Generally the two key tread dimensions are: 
Clear tread width - measured between the INSIDE of the handrail and the centre column - this should be a MINIMUM of 600mm
Tread riser height - this should be a MAXIMUM of 220mm to meet UK building regulations. Generally if you divide the total finished floor to finished floor height of your room (NOT floor to ceiling!) by 220mm this will give you the minimum number of risers in your staircase to meet building regs. If the result is not a whole number then you need to adjust to the next whole number above - e.g. if the result is 13.5 risers, you actually need 14 risers.
Please note most spiral staircases with height adjustment will have a quoted range of adjustment up to 230mm per riser - if you need to use a riser height above 220mm for any reason then we suggest you first contact your building control department for clearance.


More Info

Reviews

Write Your Own Review

You're reviewing: Additional railing Fontanot Tulip

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Customer care
Price