More Views


Supplementary external railing Magia 30 - Oak 30

As low as:
Shipping time: within 15 working days
Fontanot products are dispatched within 15 working days after receipt of payment.
The shipment of our products is FREE to the mainland UK.

We cannot deliver to Islands (Isle of Man, Isle of Wight, Jersey etc.) but we will deliver to the nearest port within mainland UK.
The supplementary external railing for the Magia 30 - Oak 30 staircase is intended to improve the safety of your spacesaver stairs if the outside of the staircase is far away from the wall.
Designed for the Magia 30 - Oak 30 spacesaver staircase, this external railing is composed of 15 varnished steel balusters and a handrail.
There's no need to worry about taking up more space, this staircase railing will only increase the width of your staircase by 5 cm.
The railing is available in Gun Metal or White finishes to match the colour of your Magia 30 - Oak 30 staircase.


The additional Magia 30 - Oak 30 external railing, made up of 15 balusters, a handrail and fixings, is used as protection if the outside of the staircase is far away from the wall.
The external railing makes the staircase 5 cm wider.
Use Internal
Measures Supplementary external railing for 15 treads
Finishing Steel
Material Steel
Wood's Essences No
Wood colors No
Metal Color White - Gun Metal - Black
Baluster Is made up of painted steel balusters in the same colour as the support
Handrail Is in PVC with an aluminium core

Do I need to comply with building regulations?

All spiral staircases whether new or replacement need to comply with the UK building regulations - there are also special requirements for Spiral Stairs and Space Saver stairs which are detailed in BS5395-2, the British Standard which applies to staircases of this type, BS5395-2 is referred to in building regulations as the general standard for spiral staircases and helical stairs. 

Spiral Staircase Dimensions under Building Regs BS5395-2

One aspect of UK building regulations is that it refers to British Standard BS5395-2 for most aspects of spiral staircase dimensions. 

Generally the two key tread dimensions are: 
Clear tread width - measured between the INSIDE of the handrail and the centre column - this should be a MINIMUM of 600mm
Tread riser height - this should be a MAXIMUM of 220mm to meet UK building regulations. Generally if you divide the total finished floor to finished floor height of your room (NOT floor to ceiling!) by 220mm this will give you the minimum number of risers in your staircase to meet building regs. If the result is not a whole number then you need to adjust to the next whole number above - e.g. if the result is 13.5 risers, you actually need 14 risers.
Please note most spiral staircases with height adjustment will have a quoted range of adjustment up to 230mm per riser - if you need to use a riser height above 220mm for any reason then we suggest you first contact your building control department for clearance.

More Info


Write Your Own Review

You're reviewing: Supplementary external railing Magia 30 - Oak 30

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Customer care